Bitget App
Trade smarter
Buy cryptoMarketsTradeFuturesCopyBotsEarn
Vitalik's new article: What else can be improved in Ethereum PoS? How to achieve it?

Vitalik's new article: What else can be improved in Ethereum PoS? How to achieve it?

BlockBeatsBlockBeats2024/10/16 04:19
By:BlockBeats

Here is a list of ideas that are under active consideration.

Original title: Possible futures of the Ethereum protocol, part 1: The Merge
Original author: Vitalik Buterin
Original translation: Deng Tong, Golden Finance

 

Special thanks to Justin Drake, Hsiao-wei Wang, @antonttc and Francesco for their feedback and review.

 

Originally, "merge" refers to the most important event in the history of the Ethereum protocol since its launch: the long-awaited and hard-won transition from proof-of-work to proof-of-stake. Today, Ethereum has been a stable and running proof-of-stake system for nearly two years, and this proof-of-stake has performed very well in terms of stability, performance, and avoiding centralization risks. However, there are still some important areas for proof-of-stake to improve.

 

My roadmap for 2023 breaks it down into several parts: improvements to technical features, such as stability, performance, and accessibility to smaller validators, and economic changes to address centralization risks. The former takes over the title of “merger”, while the latter becomes part of “scourge”.

 

 

This post will focus on the “merger” part: what else can be improved in the technical design of proof-of-stake, and what are the paths to achieve these improvements?

 

This is not an exhaustive list of improvements that could be made to proof-of-stake; rather, it is a list of ideas that are being actively considered.

 

Single-slot finality and democratization of staking

 

What problem are we solving?

 

Today, it takes 2-3 epochs (about 15 minutes) to finalize a block, and 32 ETH is required to become a staker. This was originally a compromise to strike a balance between three goals:

 

· Maximize the number of validators that can participate in staking (which directly means minimizing the minimum ETH required to stake)

· Minimize the finalization time

· Minimize the overhead of running a node

 

These three goals are in conflict with each other: In order to achieve economic finality (i.e. an attacker would need to destroy a large amount of ETH to revert a finalized block), every validator needs to sign two messages for each finalization. Therefore, if you have many validators, it either takes a long time to process all the signatures, or you need very powerful nodes to process all the signatures at the same time.

 

 

Note that this all depends on a key goal of Ethereum: ensuring that even a successful attack is costly to the attacker. This is what the term "economic finality" means. If we don't have this goal, then we can solve this problem by randomly selecting a committee (such as Algorand does) to finalize each slot. But the problem with this approach is that if an attacker does control 51% of the validators, then they can attack (revert finalized blocks, censor or delay finalization) at a very low cost: only some of the nodes in the committee can be detected as participating in the attack and punished, either by slashing or a few soft forks. This means that an attacker can attack the chain over and over again many times. Therefore, if we want economic finality, then the simple committee-based approach will not work, and at first glance, we do need the full set of validators to participate.

 

Ideally, we want to preserve economic finality while improving on the status quo in two ways:

 

· Finalize blocks in one slot (ideally keeping or even reducing the current length of 12 seconds) instead of 15 minutes

· Allow validators to stake with 1 ETH (down from 32 ETH to 1 ETH)

 

The first goal is justified by two goals, both of which can be seen as “aligning Ethereum’s properties with those of (more centralized) performance-focused L1 chains.”

 

First, it ensures that all Ethereum users benefit from the higher level of security guarantees achieved through the finalization mechanism. Today, most users cannot enjoy this guarantee because they are unwilling to wait 15 minutes; with a single-slot finalization mechanism, users can see their transactions finalized almost immediately after they confirm. Second, it simplifies the protocol and surrounding infrastructure if users and applications don't have to worry about the possibility of a chain rollback (barring relatively rare cases of inactivity leaks).

 

The second goal is motivated by a desire to support solo stakers. Poll after poll has repeatedly shown that the primary factor preventing more people from staking solo is the 32 ETH minimum. Lowering the minimum to 1 ETH would address this issue to the point where other issues become the primary factor limiting solo staking.

 

 

There is a challenge: both the goals of faster finality and more democratic staking conflict with the goal of minimizing overhead. In fact, this fact is the entire reason we don't go with single-slot finality in the first place. However, recent research suggests some possible ways to address this issue.

 

What is it and how does it work?

 

Single-slot finality involves using a consensus algorithm that finalizes blocks within one slot. This is not in itself a difficult goal to achieve: many algorithms (such as Tendermint consensus) already implement this with optimal properties. One desirable property unique to Ethereum that Tendermint does not support is inactivity leaks, which allow the chain to continue running and eventually recover even if more than 1/3 of validators are offline. Fortunately, this wish has been fulfilled: there are proposals to modify Tendermint-style consensus to accommodate inactivity leaks.

 

Leading Single-Slot Finality Proposals

 

The hardest part of the problem is figuring out how to make single-slot finality work at very high validator counts without incurring extremely high node operator overhead. There are several leading solutions to this:

 

Option 1:Brute Force - Work towards a better signature aggregation protocol, perhaps using ZK-SNARKs, which would essentially allow us to handle signatures from millions of validators per slot.

 

 

Horn, one of the proposed designs for a better aggregation protocol.

 

Option 2:Orbit Committees - A new mechanism that allows a randomly selected medium-sized committee to be responsible for finalizing the chain, but in a way that preserves the attack cost properties we are looking for.

 

One way to think about the Orbit SSF is that it opens up a space of compromise options ranging from x=0 (Algorand-style committees, with no economic finality) to x=1 (Ethereum status quo), opening up a point in the middle where Ethereum still has enough economic finality to be extremely secure, but at the same time we gain the efficiency advantage of only requiring a medium-sized random sample of validators to participate in each slot.

 

 

Orbit exploits the pre-existing heterogeneity in validator deposit sizes to obtain as much economic finality as possible, while still giving small validators a commensurate role. Furthermore, Orbit uses slow committee rotation to ensure a high overlap between adjacent quorums, thus ensuring that its economic finality still applies across committee rotation boundaries.

 

Option 3: Two-Tier Staking - A mechanism where stakers are divided into two classes, one with a higher deposit requirement and one with a lower deposit requirement. Only the tier with the higher deposit requirement would directly participate in providing economic finality. There are various proposals as to what exactly the rights and responsibilities of the tier with the lower deposit requirement would be (see, for example, the Rainbow staking post). Common ideas include:

 

· The right to delegate stake to higher tier stakeholders

· A randomly drawn lower tier stakeholder attests and is required to finalize each block

· The right to generate inclusion lists

 

How does this relate to existing research?

 

· A path to single-slot finality (2022): https://notes.ethereum.org/@vbuterin/single_slot_finality

· A concrete proposal for a single-slot finality protocol on Ethereum (2023): https://eprint.iacr.org/2023/280

· Orbit SSF: https://ethresear.ch/t/orbit-ssf-solo-staking-friendly-validator-set-management-for-ssf/19928

· Further analysis of Orbit-style mechanisms: https://notes.ethereum.org/@anderselowsson/Vorbit_SSF

· Horn, a signature aggregation protocol (2022): https://ethresear.ch/t/horn-collecting-signatures-for-faster-finality/14219

· Signature merging for large-scale consensus (2023): https://ethresear.ch/t/signature-merging-for-large-scale-consensus/17386?u=asn

· Signature aggregation protocol proposed by Khovratovich et al.: https://hackmd.io/@7dpNYqjKQGeYC7wMlPxHtQ/BykM3ggu0#/

· Signature aggregation based on STARK (2022): https://hackmd.io/@vbuterin/stark_aggregationRainbow

· Staking: https://ethresear.ch/t/unbundling-staking-towards-rainbow-staking/18683

 

What’s left to do? What are the tradeoffs?

 

There are four main possible paths (we can also take hybrid paths):

 

· Status quo

· Orbit SSF

· Strong SSF

· SSF with two layers of staking

 

(1) This means doing nothing and keeping staking as is, but this makes Ethereum’s security experience and staking centralization properties worse than they would otherwise be.

 

(2) Avoid “high tech” and solve the problem by cleverly rethinking the protocol assumptions: we relax the “economic finality” requirement so that we require attacks to be expensive, but accept that the cost of an attack could be 10x lower than it is today (e.g., $2.5 billion instead of $25 billion). It is widely believed that Ethereum’s economic finality today is far beyond what it needs to be, and that its main security risks lie elsewhere, so this is arguably an acceptable sacrifice.

 

The main work will be to verify that the Orbit mechanism is secure and has the properties we want, and then to fully formalize and implement it. In addition, EIP-7251 (increase maximum valid balance) allows for voluntary validator balance consolidation, which immediately reduces chain validation overhead and serves as an effective initial phase for Orbit’s rollout.

 

(3) Avoids clever rethinking and instead brute-forces the problem. Doing this requires gathering a large number of signatures (1 million+) in a very short period of time (5-10 seconds).

 

(4) Avoids both clever rethinking and high-tech, but it does create a two-tier staking system that still has centralization risks. The risks depend largely on the specific rights granted to the lower staking tier. For example:

If low-tier stakers are required to delegate their attestation power to high-tier stakers, then delegation may become centralized and we end up with two highly centralized staking tiers. If a random sampling of the low-tier stakers is required to approve each block, then an attacker can spend a very small amount of ETH to prevent finality. If low-tier stakers can only make inclusion lists, then the attestation layer may still be centralized, at which point a 51% attack on the attestation layer can censor the inclusion lists themselves.

 

Multiple strategies can be combined, for example:

 

· (1 + 2): Add Orbit without single-slot finality.

· (1 + 3): Use brute force techniques to reduce the minimum deposit size without single-slot finality. The amount of aggregation required is 64 times less than the pure (3) case, so the problem becomes easier.

· (2 + 3): Do Orbit SSF with conservative parameters (e.g. 128k validator committee instead of 8k or 32k), and use brute force techniques to make it super efficient.

· (1 + 4): Add rainbow staking without doing single-slot finality.

 

How does it interact with the rest of the roadmap?

 

Among other benefits, single-slot finality reduces the risk of certain types of multi-block MEV attacks. Additionally, in a single-slot finality world, the prover-proposer separation design and other in-protocol block production pipelines need to be designed differently.

 

The weakness of brute force strategies is that they make it harder to shorten slot times.

 

Single Secret Leader Election

 

What problem are we solving?

 

Today, which validator will propose the next block is known in advance. This creates a security vulnerability: an attacker can monitor the network, identify which validators correspond to which IP addresses, and launch a DoS attack on the validator when it is about to propose a block.

 

What is it? How does it work?

 

The best way to solve the DoS problem is to hide the information about which validator will produce the next block, at least until the block is actually produced. Note that this is easy if we remove the "single" requirement: one solution is to let anyone create the next block, but require randao to reveal less than 2256 / N. On average, only one validator will be able to meet this requirement - but sometimes there will be two or more, and sometimes there will be zero. Combining the "secrecy" requirement with the "single" requirement has always been a difficult problem.

 

The single secret leader election protocol solves this problem by using some cryptography to create a "blind" validator ID for each validator, and then gives many proposers a chance to shuffle and re-blind the pool of blind IDs (this is similar to how mixnets work). At each epoch, a random blind ID is chosen. Only the owner of that blind ID can generate a valid proof to propose a block, but no one knows which validator that blind ID corresponds to.

 

Whisk SSLE Protocol

 

What are some links to existing research?

 

· Dan Boneh's paper (2020): https://eprint.iacr.org/2020/025.pdf

· Whisk (Ethereum specific proposal, 2022): https://ethresear.ch/t/whisk-a-practical-shuffle-based-ssle-protocol-for-ethereum/11763

· Single Secret Leader Election tag on ethresear.ch: https://ethresear.ch/tag/single-secret-leader-election

· Simplified SSLE using ring signatures: https://ethresear.ch/t/simplified-ssle/12315

 

What’s left to do? What are the tradeoffs?

 

Really, all that’s left is to find and implement a protocol that’s simple enough that we can easily implement it on mainnet. We place a lot of importance on Ethereum being a fairly simple protocol, and we don’t want the complexity to grow further. The SSLE implementations we’ve seen add hundreds of lines of spec code and introduce new assumptions in complex cryptography. Figuring out a sufficiently efficient quantum-resistant SSLE implementation is also an open question.

 

It may eventually come to the point where the "marginal additional complexity" of SSLE will only drop low enough if we introduce general-purpose zero-knowledge proofs on L1 of the Ethereum protocol for other reasons (e.g. state tries, ZK-EVM).

 

Another option is to not bother with SSLE at all, and instead use extra-protocol mitigations (e.g. at the p2p layer) to address the DoS problem.

 

How does it interact with the rest of the roadmap?

 

If we add a prover-proposer separation (APS) mechanism such as execution tickets, then execution blocks (i.e. blocks containing Ethereum transactions) will not need SSLE, as we can rely on specialized block builders. However, for consensus blocks (i.e. blocks containing protocol messages such as attestations, parts that may contain lists, etc.) we will still benefit from SSLE.

 

Faster Transaction Confirmations

 

What Problems Are We Solving?

 

It would be valuable to see Ethereum’s transaction confirmation time reduced further, from 12 seconds to 4 seconds. Doing so would significantly improve the L1 and rollup-based user experience while making defi protocols more efficient. It would also make it easier for L2 to decentralize, as it would allow a large number of L2 applications to work on rollups, reducing the need for L2 to build their own committee-based decentralized ordering.

 

What is it? How does it work?

 

There are roughly two techniques here:

 

· Reduce the slot time, for example to 8 seconds or 4 seconds. This does not necessarily mean 4-second finality: finality inherently requires three rounds of communication, so we can make each round a separate block that will at least be tentatively confirmed after 4 seconds.

 

· Allow proposers to issue pre-confirmations during the slot process. In the extreme case, proposers could include the transactions they see in their blocks in real time, and immediately issue pre-confirmation messages for each transaction ("My first transaction is 0×1234...", "My second transaction is 0×5678..."). The case where a proposer issues two conflicting confirmations can be handled in two ways: (i) by slashing the proposer, or (ii) by using attestors to vote on which one is earlier.

 

What are some links to existing research?

 

· Based on Preconfirmations: https://ethresear.ch/t/based-preconfirmations/17353

· Unbundling pbs-towards-protocol-enforced-proposer-commitments-pepc/13879

· Staggered periods on parachains (a 2018 idea for low latency): https://ethresear.ch/t/staggered-periods/1793

 

What’s left to do, and what are the tradeoffs?

 

It’s unclear how practical it would be to reduce slot times. Even today, it’s difficult for stakers in many parts of the world to get proofs fast enough. Trying 4 second slot times runs the risk of centralizing the validator set, and makes becoming a validator outside of a few privileged regions impractical due to latency.

 

The weakness of the proposer preconfirmation approach is that it greatly improves average-case inclusion time, but not worst-case inclusion time: if the current proposer is functioning well, your transaction will be preconfirmed in 0.5 seconds instead of being included in (on average) 6 seconds, but if the current proposer is offline or functioning poorly, you will still have to wait a full 12 seconds for the next slot to start and a new proposer to come in.

 

In addition, there is an open question of how to incentivize preconfirmations. Proposers have an incentive to maximize their optionality for as long as possible. If provers signed off on the timeliness of preconfirmations, then transaction senders could make part of their fees conditional on immediate preconfirmations, but this would place an additional burden on provers and could make it more difficult for provers to continue to act as neutral "dumb pipes".

 

On the other hand, if we don’t try to do this and keep finalization times at 12 seconds (or longer), the ecosystem will place more emphasis on pre-confirmation mechanisms enacted by Layer 2, and cross-Layer 2 interactions will take longer.

 

How does this interact with the rest of the roadmap?

 

Proposer-based pre-confirmation actually relies on attestor-proposer separation (APS) mechanisms such as execution tickets. Otherwise, the pressure to provide real-time pre-confirmation may create too much centralized pressure on regular validators.

 

Other Areas of Research

 

51% Attack Recovery

 

It is often assumed that in the event of a 51% attack (including attacks that cannot be cryptographically proven, such as censorship), the community will come together to implement a minority soft fork, ensuring that the good guys win and the bad guys leak or are slashed due to inactivity. However, this level of over-reliance on the social layer is arguably unhealthy. We can try to reduce the reliance on the social layer and make the recovery process as automated as possible.

 

Full automation is impossible, because if it were, this would count as a>50% fault-tolerant consensus algorithm, and we already know the (very strict) mathematically provable limitations of such algorithms. But we can achieve partial automation: for example, clients could automatically refuse to accept a chain as final, or even as the head of a fork choice, if it censors transactions that the client has seen for a long enough time. A key goal is to ensure that the bad guys in an attack can at least not win quickly.

 

Increase the quorum threshold

 

Today, blocks are finalized if 67% of stakers support it. Some people think this is too aggressive. In the entire history of Ethereum, there has only been one (very brief) failure of finalization. If this percentage were increased to 80%, the number of additional non-finality periods would be relatively low, but Ethereum would gain security: in particular, many of the more contentious scenarios would result in a temporary halt to finality. This seems much healthier than an immediate win by the “wrong party”, whether that’s an attacker or a buggy client.

 

This also answers the question of “what’s the point of solo stakers”. Today, most stakers already stake via pools, and it seems unlikely that solo stakers could ever get as high as 51% of staked ETH. However, it seems possible for solo stakers to reach a majority-blocking minority if we try, especially if the majority reaches 80% (so a majority-blocking minority would only need 21%). As long as solo stakers don’t participate in a 51% attack (either finality reversal or censorship), such an attack won’t result in a “clean win”, and solo stakers actively help prevent minority soft forks.

 

Quantum Resistance

 

Metaculus currently believes that, albeit with a large margin of error, it is likely that quantum computers will begin to break cryptography sometime in the 2030s:

 

 

Quantum computing experts, such as Scott Aaronson, have also recently begun to take the likelihood of quantum computers actually working in the medium term more seriously. This has implications for the entire Ethereum roadmap: it means that every part of the Ethereum protocol that currently relies on elliptic curves will need some kind of hash-based or other quantum-resistant alternative. This specifically means that we cannot assume that we will be able to rely forever on the superior properties of BLS aggregation to process signatures from large validator sets. This justifies conservatism in performance assumptions for proof-of-stake designs, and is a reason to more aggressively develop quantum-resistant alternatives.

 

0

Disclaimer: The content of this article solely reflects the author's opinion and does not represent the platform in any capacity. This article is not intended to serve as a reference for making investment decisions.

PoolX: Locked for new tokens.
APR up to 10%. Always on, always get airdrop.
Lock now!